 |
 |
Glass
Corner Shelf Installation Instructions:
To install the shelves you would need a white adhesive caulking, or any
color available that is similar to your wall paint. For cosmetic reasons
do not use clear caulking |
 |
 |
 |
 |
Step
1
Mark the spot where you would like the corner shelf to go. If you are installing
a rectangle shelf, be sure to label one wall for the long side of the shelf
and the other wall for the short side of the shelf. |
 |
Step
2
Use a level and draw two leveled lines at about the same length of the shelf.
One at each side of the wall where the shelf is going to be installed. |
 |
 |
 |
Step
3
Using the supplied template mark the position of the grooves on the wall.
The arrow on the template must point to the corner |
 |
Step
4
Use drill to start cutting the grooves followed by using wall-saw. Only
cut the area marked. Then, test to fit the shelf into the grooves. Clean
all grooves, walls and shelf free of dust. |
 |
 |
 |
Step
5
Apply 3/8” bead of adhesive caulking just below the lines, and in
the grooves. Install the shelf immediatley before the caulking dries. After
installation fill all gaps with more caulking. |
 |
Step
6
Push the shelf in place. Then using a sponge clean all exess caulking. Let
it dry over night. If necessary you may patch and paint any gaps for better
appearance |
 |
 |
 |
