Product Information :
Footplates
 Triangle Footplates are an optional accessory that can be threaded into
the bottom of the round chrome posts to provide more stability to the
free standing shelving unit. Triangle Footplates also provide an option
of anchoring the free standing units to the floor.
- Price per each
- Floor anchors not included.
- Purchase posts here
Casters
A great way to add mobility to your wire shelving units. Threaded stem caster for 1/2" thread stem x 12 threads per inch. Casters,
commonly called wheels or tires, are swivel type and are equipped with a
brake. Our 5" diameter casters are available in two tread types (rubber
or polyurethane). Threaded style caster are specifically made for SI
brand 1" chrome posts and may not fit all other types of wire shelving.
For universal compatibility with 1" posts, check out our Non-Threaded Casters
- Casters sold individually. Four required per unit, three for corner units
- These threaded stem casters have 1/2" diameter stems
- 12 threads/inch and are based on the English (imperial) measurement and not metric
- 3” rubber caster weight capacity is 150lbs each (600 lb per set of four)
-
4” rubber caster weight capacity is 200lbs each (800 lb per set of four)
-
5” rubber caster weight capacity is 250lbs each (1000 lb per set of four)
Post Levelers Our post leveling feet screw into the bottom of our SI Chrome Posts.
Leveling feet come with each post but if you need a replacement or
extras, they are available for purchase. Please note that our SI brand
leveling feet may not work with other brand posts due to the threading.
Please call for details if you are trying to use with other brands.
Sold individually.
Assembly Guide:
 |
|
|
|
|
Chrome Wire Shelving Assembly Instructions:
|
 |
 |
 |
 |
First decide whether you would like the wheels or chrome stubs for the legs of the shelving unit. If using the chrome stubs, attach the chrome stubs to the bottom of each pole. Follow by attaching the chrome pegs. If you wish to use the wheels for a mobile shelving unit, simply attach the wheels to the bottom of the poles instead of the stubs and pegs. Remember, you can always switch the pegs for wheels if you later need more mobility from your shelving unit. |
 |
Once your base is complete, now you will add the shelves. Use 4 snap-on sleeves and snap them onto the very bottom of the four legs. Slide the first shelf onto the four poles, stopping when the shelf hits the snap-on sleeves. Using a rubber mallet, gently pound the shelf to ensure a tight fit. |
 |
 |
 |
Place 4 snap-on sleeves at a desired level above the previous shelf. Slide on the shelf and pound with a rubber mallet. Repeat a second time for the third shelf. |
 |
Use the last 4 snap-on sleeves by snapping them onto the very top of the four poles. Place the fourth and final shelf onto the sleeves and pound with a rubber mallet.. |
 |
 |
Your shelving unit is finished and ready for use! |
 |
 |
 |
|
