Shopping Cart
Home
|
My Account
|
Contact Us
SI Chrome Wire Shelving
|
elfaź Products
|
Decorative Shelving
|
Boxes & Bins
|
Lockers
|
Accessories
|
Clearance
Search:
Call:
800.637.9508
SI Chrome Wire Shelving
elfa® Products
Decorative Shelving
Umbra Decorative Shelving
Floating Glass Shelves
Boxes & Bins
Lockers
Accessories
Clearance
Sign up & receive a
10% discount
Newsletter Sign-up
Home
>
Decorative Shelving
>
Floating Glass Shelves
>
Rectangle Glass Shelf
Easy-to-install shelves add function and style to your corners. Four shapes -- Rectangle, Curve, Triangle, and Square -- are available in multiple sizes and can be arranged in a variety of ways. These tempered glass shelves look delicate but are strong enough to hold up to 100 lbs. per shelf!
Price Per Shelf
Ground shipping only
Easy-to-install shelves add function and style to your corners. Four shapes -- Rectangle, Curved, Triangle, and Square -- are available in multiple sizes and can be arranged in a variety of ways. These tempered glass shelves look delicate but are strong enough to hold up to 100 lbs. per shelf!
All glass shelves are 3/8" clear tempered glass unless marked otherwise
Price Per Shelf
Assembly Guide:
Glass Corner Shelf Installation Instructions:
To install the shelves you would need a white adhesive caulking, or any color available that is similar to your wall paint. For cosmetic reasons do not use clear caulking
Step 1
Mark the spot where you would like the corner shelf to go. If you are installing a rectangle shelf, be sure to label one wall for the long side of the shelf and the other wall for the short side of the shelf.
Step 2
Use a level and draw two leveled lines at about the same length of the shelf. One at each side of the wall where the shelf is going to be installed.
Step 3
Using the supplied template mark the position of the grooves on the wall. The arrow on the template must point to the corner
Step 4
Use drill to start cutting the grooves followed by using wall-saw. Only cut the area marked. Then, test to fit the shelf into the grooves. Clean all grooves, walls and shelf free of dust.
Step 5
Apply 3/8” bead of adhesive caulking just below the lines, and in the grooves. Install the shelf immediatley before the caulking dries. After installation fill all gaps with more caulking.
Step 6
Push the shelf in place. Then using a sponge clean all exess caulking. Let it dry over night. If necessary you may patch and paint any gaps for better appearance
Browse for more products in the same category as this item:
Decorative Shelving
>
Floating Glass Shelves
Decorative Shelving
Shopping Cart Software
by Volusion
(Your shopping cart is empty)