Add storage and style all at the same time without the bulky look of visible brackets. Combining the simple design of our glass shelves with a thinner size perfect for corners and specialized areas, these airy glass shelves will let you display your decor and photos without detracting from the look by being too ‘busy’. For even more decorative options, check out the rest of our wall shelves.
Glass Corner Shelf Installation Instructions: To install the shelves you would need a white adhesive caulking, or any color available that is similar to your wall paint. For cosmetic reasons do not use clear caulking
Step 1 Mark the spot where you would like the corner shelf to go. If you are installing a rectangle shelf, be sure to label one wall for the long side of the shelf and the other wall for the short side of the shelf.
Step 2 Use a level and draw two leveled lines at about the same length of the shelf. One at each side of the wall where the shelf is going to be installed.
Step 3 Using the supplied template mark the position of the grooves on the wall. The arrow on the template must point to the corner
Step 4 Use drill to start cutting the grooves followed by using wall-saw. Only cut the area marked. Then, test to fit the shelf into the grooves. Clean all grooves, walls and shelf free of dust.
Step 5 Apply 3/8” bead of adhesive caulking just below the lines, and in the grooves. Install the shelf immediatley before the caulking dries. After installation fill all gaps with more caulking.
Step 6 Push the shelf in place. Then using a sponge clean all exess caulking. Let it dry over night. If necessary you may patch and paint any gaps for better appearance.