Return to Hanger Rails for Width

Sort By:: Most Helpful Newest Rating: High to Low Rating: Low to High	Page of 1

9 of 9 people found the following review helpful:

Excellent product - can't recommend highly enough! October 30, 2018 Reviewer: MakingtheMostofIt   I purchased a 5 shelf chrome rack with a some additional hooks and shelf liners.  This is the highest quality product I've purchased in years.  It assembled without a hitch because the pieces fit together as they were supposed to, which I really appreciated as I put this together by myself.  It is very sturdy as well as being attractive, and can be purchased in many size combinations so it will fit in the desired spot without wasting any space.  The stops for the shelving are cleverly designed to work well and install easily.  The options for additional hooks, shelf liners, etc. are varied and I spent some time thinking about just what I would need before placing my order.  My planning paid off, as I ended up with just what I needed.  I am delighted with this excellent product and cannot recommend it highly enough! Was this review helpful to you?

1 of 1 people found the following review helpful:

Just what I needed special application September 28, 2016 Reviewer: Jerry from Minneapolis, MN   Using it (6' rail + two short posts + two footplates) to bridge across the top of a set of cabinets (about 7' up) in order to hang a grid wall using the "S"-hooks. 8 inch hanger rails can NOT be used with any 8 inch shelf. The 8 inch hanger rails are shorter than the shelf length or width. Place the hanger rail on top of the shelf. The difference is immediately clear when you look through both sets of holes. Align one end and the other end is WAY off and no post can go through all the holes. ONLY use the 8 inch hanger rails when there is a long distance so the posts can be bent to fit. Was this review helpful to you?

1 of 1 people found the following review helpful:

Good Cart Accessory Reviewer: ce from seattle   The hanger rails works great on mobile carts to prevent objects from sliding off. I ordered the 30" rails but they were not quite long enough to fit my 30" x 18" cart. I was able to bend the ends of the rails out a little bit and they fit fine. Was this review helpful to you?

1 of 1 people found the following review helpful:

Thanks! Reviewer: Trusan from Evergreen, Colo   Thanks, it did the trick! Was this review helpful to you?

1 of 1 people found the following review helpful:

Hanger Rail Reviewer: Bella from Las Cruces, NM   We added this hanger rail at the end of our shelf and then placed hooks on it.  It's perfect for hanging hats, aprons, keys, etc. Our shelves are in the utility room and solved all our storage problems.  We were pleasantly surprised to see how sturdy and attractive our unit was. Was this review helpful to you?

1 of 1 people found the following review helpful:

Hangar rail for earthquake safety Reviewer: Grrl Geek from Los Gatos, CA   I've used these systems at work for lab stations and they're brilliant. Wanted to use them at home to build a quick and dirty pantry, but was concerned about earthquake safety. A hangar rail across the front/sides looks like just the ticket to keep jars on the shelf. Woot! Was this review helpful to you?

1 of 1 people found the following review helpful:

Helpful hanger Reviewer: ChromeCloud from WI   Hanger is useful as a handle & as a bar to mount/strap small devices. Was this review helpful to you?

1 of 1 people found the following review helpful:

keep stuff from sliding off shelf Reviewer: Mary Sews from Lummi Island, W   I use the hangrails on front of shelves to keep packaged clothing from sliding off, on back of shelf somewhat higher with stiff plastic attached for the same stuff to lean against so it sits at an angle and is more visible. Was this review helpful to you?

1 of 1 people found the following review helpful:

Not all shelving has the same dimensions Reviewer: Drew from Houston   I was intending to add this brace as a support to some existing shelving that I had purchased from another source. Due to a 3/8" variation in the length of the support versus the length of the existing shelving, I am unable to use the brace. Was this review helpful to you?

1 of 1 people found the following review helpful:

Not compatible with same brand shelving Reviewer: eileen from Austin, TX   How is one supposed to use this product?  The engineering is very poor.  This is shorter than the same size (same brand) shelving, rendering it useless.  It is also rough in sponts, easily giving metal slivers.  In General, my view of the quality of this brand is going down. My intended use was as supports, near the bottom of the unit.  But I can not think of any use that would work, due to the s Was this review helpful to you?